Use and maintenance of peanut coating machine

The Peanut Coating Machine, a crucial asset in the food processing sector, demands careful operation and regular maintenance to ensure sustained efficiency.

This guide provides detailed insights into the operational procedures of the machine and outlines key maintenance practices to maximize performance and extend its lifespan.

Operating the Peanut Coating Machine:

1. Pre-Startup Checks:
   • Ensure the gearbox is adequately lubricated up to the specified mark.
   • Verify the secure fastening of all machine components.
   • Thoroughly clean the coating pan, ensuring its surface is pristine.
2. Power On and Initial Rotation:
   • Power on the machine, ensuring the coating pan rotates clockwise, aligning with the markings on the belt cover.
   • Run the machine without peanuts for 2 minutes to check for any abnormalities and ensure smooth operation.
3. Adjusting Tilt Angle for Optimal Performance:
   • The tilt angle of the coating pan directly impacts production efficiency and quality. A recommended tilt angle of 30° typically yields optimal results.
4. Feeding Ingredients:
   • Press the main motor button after loading peanuts or other ingredients.
   • If equipped with a heating device, press the blower motor button and switch on the heating wire as needed.

Maintenance Practices:

1. Regular Lubrication:
   • Change the gearbox lubricating oil regularly, typically every six months.
   • Apply lubricating grease to the rolling bearings for smooth operation.
2. Cleaning and Surface Protection:
   • Thoroughly clean the machine during extended periods of non-use.
   • Apply oil to the surface of the coating pan, especially if it is made of copper, to prevent oxidation.
3. Protective Measures:
   • Do not dismantle protective covers for belts, belt boxes, or other components.
   • Ensure all electrical components are promptly covered to guarantee safe repairs.
4. Grounding:
   • The machine must be properly grounded to ensure electrical safety.

Conclusion

By adhering to the outlined operational procedures and incorporating regular maintenance practices, you can ensure the stable operation and long-term reliability of your Peanut Coating Machine.

Regular checks and proper care contribute to extending the machine’s lifespan, providing assurance for sustained high-quality production.